Outback Flexmax 80 FM80 MPPT 80 AMP Solar Charge Controller. Outback Power Systems FLEXmax 80 MPPT Charge Controller. The FLEXmax 80 is the latest innovation in Maximum Power Point Tracking (MPPT) charge controllers from OutBack Power Systems. The FLEXmax 80s innovative MPPT algorithm is both continuous and active, increasing your renewable energy yield up to 30%. Included in the FLEXmax 80 are all of the features first developed by OutBack Power in the revolutionary MX60, such as support for a wide range of nominal battery voltages and the ability to step-down a high voltage solar array to recharge a low voltage battery. A built-in backlit display shows status information at the touch of a button. Enhanced network communications allow the FLEXmax 80 to be remotely programmed via the optional MATE system display and controller. The new FLEXmax 80 is the only choice when you demand a high performance, efficient and customizable charge controller for your advanced power system. Increases PV Array Output by up to 30%. Advanced Continuous Maximum Power Point Tracking Algorithm. Full Output Capacity in Ambient Temperatures up to 104°F (40°C). Battery Voltages from 12 VDC to 60 VDC. Automatic Battery Voltage Detection at Start Up. Fully OutBack Network Integrated and Programmable. Programmable Auxiliary Control Output. Negative or Positive Ground System Capable. Built-in 128 days of Data Logging. 12, 24, 36, 48, or 60 VDC (Single model – selectable via field programming at start-up). Maximum Solar Array STC Nameplate. 12 VDC systems 1250 Watts / 24 VDC systems 2500 Watts / 48 VDC systems 5000 Watts / 60 VDC Systems 7500 Watts. NEC Recommended Solar Array STC Nameplate. 12 VDC systems 1000 Watts / 24 VDC systems 2000 Watts / 48 VDC systems 4000 Watts / 60 VDC Systems 5000 Watts. PV Open Circuit Voltage (VOC). 150 VDC absolute maximum coldest conditions / 145 VDC start-up and operating maximum. Less than 1 Watt typical. Five Stages: Bulk, Absorption, Float, Silent and Equalization. Voltage Regulation Set points. 10 to 80 VDC user adjustable with password protection. Programmable Voltage Setpoint and Duration – Automatic Termination when completed. Automatic with optional RTS installed / 5.0 mV per °C per 2V battery cell. Can charge a lower voltage battery from a higher voltage PV array – Max 150 VDC input. Programmable Auxilary Control Output. 12 VDC output signal which can be programmed for different control applications (Maximum of 0.2 amps DC). 3.1 (8 cm) backlit LCD screen – 4 lines with 80 alphanumeric characters total. Remote Display and Controller. Optional Mate or Mate2 with RS232 Serial Communications Port. Proprietary network system using RJ 45 Modular Connectors with CAT 5e Cable (8 wires). Last 128 days of Operation – Amp Hours, Watt Hours, Time in Float , Peak Watts, Amps, Solar Array Voltage, Max Battery Voltage Min Battery Voltage and Absorb for each day along with total Accumulated Amp Hours, and kW Hours of production. Consult factory for approved Turbines. Requires two Pole Breakers for switching both positive and Negative Conductors on both Solar Array and Battery Connections (HUB-4 and HUB-10 can not be used for use in positive ground applications). Minimum -40° to maximum 60° C (Power capacity of the controller is automatically derated when operated above 40° C). One 1″ (35mm)on the back; One1″ (35mm) on the left side; Two 1 (35mm) on the bottom. Unit, 12.20 lbs (5.56 kg). Unit 16.25″ x 5.75″ x 4 (41.3 x 14 x 10 cm) – (H x W x D). Remote Temperature Sensor (RTS), HUB 4, HUB 10, MATE, MATE 2. Use appropriate wire size in accordance with NEC. Specifications subject to change without notice. UP TO 50% DISCOUNTS. Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt. See our other items. The FLEXmax 80’s innovative MPPT algorithm is both continuous and active, increasing your renewable energy yield up to 30%. Sellers: Add a FREE map to your listings. The item “OUTBACK FM80 FLEXMAX 80 MPPT 80 AMP SOLAR CHARGE CONTROLLER OUTBACK POWER” is in sale since Thursday, October 27, 2016. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “hurricanewindpowercom” and is located in Roanoke, Virginia. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Russian federation, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.
- Brand: OutBack Power
- Model: FLEXmax 80 (FM80-150VDC)
- MPN: FM80